CAPE Forum

Ansys => CFX => Topic started by: pitney1 on May 11, 2012, 10:47:15 PM

Title: Fluid with a non-Newtonian viscosity dependence in CFX.
Post by: pitney1 on May 11, 2012, 10:47:15 PM
I would like to set-up a problem for a fluid with a non-Newtonian viscosity dependence. Are there any built in models for doing this in CFX?
Title: Re: Fluid with a non-Newtonian viscosity dependence in CFX.
Post by: william on May 11, 2012, 10:47:51 PM
There are various non-Newtonian viscosity models available in CFX as beta features.
The available models are the Herschel-Bulkley, Bird-Carreau, Cross, and Power-Law
models. The Bingham Plastic model can be set up as a special case of the Herschel-Bulkley
model.

To enable access to the models, you can modify the RULES file located in the /etc folder
of the CFX installation directory as follows.

1. First copy the existing RULES file to another file (say RULES.OLD) so that the original file is preserved.
2. Edit the RULEs file and find the object:

SINGLETON: DYNAMIC VISCOSITY

Replace the entire SINGLETON: DYNAMIC VISCOSITY object with the corresponding object contained
in the attached file short_rules.

3. Save the modified RULES file and start the CFX launcher. If you edit an existing definition file
using the Solver Manager, you will be able to change the Option for Dynamic Viscosity for a particular material
to one of the non-Newtonian options. You must then add and set the desired parameters for that
particular model.